K-202-DVA Alarm Detector 2 inputs speech
*Price may change due to echange rate.
Viking's K-202-DVA is a fully programmable dialer for by reporting failures. The K-202-DVA has two potential-free contact inputs which each can call seven to 32-digit numbers and a message being played back to 1 minute in length that is specific to that input.
Messages can be recorded locally or remotely with a total recording time for both inputs of 2 minutes. The K-202-DVA has traffic state detection for normal and fast busy signal, answer call, CPC (reverse polarity) and not answer. Programming is easily done with a standard DTMF telephone.
applications
Security / burglary / fire alarm
Alarm system or equipment malfunction
Liquid level monitoring
functions
Non-volatile memory (no batteries required)
Space for 32 seven-digit phone numbers per entry (fourteen 32-digit numbers total)
2 minutes of recording time (1 minute per input)
Programmable message repeat counter
Programmable lap counter (numbers)
Two programmable inputs normally open (NO) or normally closed (NC)
Programmable call delay for remote programming and alarm polling
Qualifier programmable timer for each entry (entry delay)
Programmable heating timer for each input (time to reset for input to become active again)
Traffic state detection (detection capabilities during progress of the call)
Programmable number of transient signals
Remote security and access codes
Local or remote programming and record
Compatible with RC-2A and RC-3 relay controllers
Phone numbers can be programmed as pager numbers (no voice message)
specifications
Power: 230V AC / 12V DC 500mA adapter included
Dimensions: 133mm x 91mm x 44mm (5.25 "x 3.6" x 1.75 ")
Weight: 0.68 kg (1.5 lbs)
Setting: 0 ° C to 32 ° C (32 ° F to 90 ° F) with 5% to 95% non-condensing humidity
Speak Voltage: 12V DC
choose DTMF: 120 ms on / off, 50ms on / off
CPC Detection Time: 320 ms minimum
Message recording time: 2 minutes (total)
Sampling Rate: 64 K
Input detection time: 80 ms Qualifier timer 0
Qualifier Timer Resolution: 1 second to 18 hours
Resume Resolution Timer: 1 second to 18 hours
Connections: (1) RJ11 connector (1) 4 position screw terminal block for inputs