Alarm Detector 2 inputs with speech

There are two types of alarms: 

- See code (beeps) 
- Speech (itself inspreekbare texts). 

Both types are available with 2, 4, 8, 12 or 16 potential-free make / break alarm inputs. This way you can connect a wide variety of systems and devices, and monitor. In total, you can program eight phone numbers and desired by choosing a setting input sequence. 

Messages can be transmitted to: 
- Phone & mobile phone (voice messages) 
- The newest pager (pager & sematone) * 
- Sent to center (Contact ID protocol) * 

The Alarm Notifier includes preferred circuit that ensures that the alarm system is always the phone line itself can demand, even if it is busy at that moment. Coupling number makes it possible to change the phone numbers of the already-programmed sequence input per alarm. If you do not then the programmed numbers for each entry will be selected in the same order 

An alarm message is repeated so long until the message is received correctly and the alarm is reset. Resetting an emergency call can be done automatically or by calling back. In both cases there may possibly be assigned a PIN to secure this additional. 

Alarm Detector is equipped with transient protection on the telephone line, the voltage and the alarm inputs. Furthermore, the maintenance-free backup battery (12V, 0.8Ah) causes power outages in that the detector is directly provided with emergency power. In operation the alarm dialer can work 1 hour. At rest, the alarm device will continue to work more than 4 hours. In case of total power failure the data as phone numbers, speech texts and programming are kept for at least 10 years. 

The alarm detectors are standard for an analog telephone line. There are several interfaces for connecting to the GSM network.Inquire about the possibilities. 

specifications 
- History of the last 32 alarms with date and time 
- Housing of impact resistant plastic and spray waterproof 
- Density class IP67 
- Dim. 240 x 130 x 80 mm 
- Nutrition; 230Vac. 50-60Hz. 
- Emergency power; 12Vdc battery. - 0,8Ah (supplied) 
- Backlit display with 2x16 characters 
- Weight; 1.4kg. 
- 12Vdc output, 150mA maximum for external signal sources 
- Relay output during alarm / fault 
- Battery Condition monitoring with visual and telephone report 
- Line monitoring with visual notification 

Reporting to central stations is possible via the Contact ID protocol. They provide professional handling of emergency calls. To do this requires an account which must also be programmed in the alarm detector for identification.