K-1900-6-IP telephone for VoIP SIP PoE

The K-1900-6 IP phone can be programmed to automatically dial a phone number after lifting the handset. If the call is not answered can call the K-1900-6 IP to 4 reserve numbers. The K-1900-6-IP is designed for fast and reliable communications for VoIP SIP systems with PoE. The phone can be configured from a PC in the same LAN or remotely using a static IP address.

If the call is answered from the K-1900-6-IP receiver can operate the relay for controlling door locks or gates. This relay is also configurable to activate during a call, and can be used for CCTV control.

The K-1900-6 IP EWP has the same features as the K-1900-6 IP but with Enhanced Weather Protection (EWP). EWP by this phone can also be used outdoors. EWP includes foam seals, closed connections and potted electronics.

applications

• Door and gate communication
• telephone kiosk
• customer service phone
• Self Service Points
• Security and emergency phone
• detention Phone

Opportunities

• Vandal Resistant: SS 316 quality stainless steel front, heavy handset hook and hook switch, stainless steel armor cloak and security screws (Torx).
• Weatherproof: Marine grade stainless steel 316 stainless steel front and Torx screws.
• Handset with volume control via pushbutton closed and is suitable for use with hearing aids.
• 2Amp relay make and break for door lock control or CCTV signaling.
• SIP compliant (see list of tested IP PBXs)
• PoE (Class 2,
• Automatic Noise Canceling (ANC) function for good communication in loud surroundings.
• Firmware can be downloaded from the network
• The K-1900-6 IP comes standard with 36 "steel reinforced handset cord.
• The K-1900-6 IP EWP is standard equipped with 54 "armed handset cord.
• Automatically dials up to 4 reserve number is busy, or not to reply.
• Variants with Enhanced Weather Protection (EWP) are waterproof (IP66 protection)
• To configure remotely.
• Wide temperature range -40 ° C to 60 ° C
• Automatically assume for monitors.

specifications

• Power supply: PoE Class 2 (
• Size: 116mm x 115mm x 95mm
• Weight: 0.9 kg
• Temperature range: -40 ° C to 60 ° C
• Humidity K-1900-6 IP: RH 5% to 95%, non-condensing
• Humidity K-1900-6 IP EWP: RH 100%
• Handset cable length K-1900 IP 34 "to 37"
• Handset cable length K-1900 IP EWP 53 "to 58"
• Installation: mounting (including junction box.)
• Audio Codec: G711u, G711A, G722
• Network: IEEE 802.3 af PoE, RFC3261 SIP 2.0, 100BASE-TX with auto crossover
• Connection (1) RJ45 10/100 Base-T