NB-LoT Pulse transmitter - AirTM-100NB wireless sensor low power

DESCRIPTION

• The Pulse converter is designed for use on existing gauges even without impulse output „S0" (gauge must support sensing).
• AirTM-100 converts gauge consumption using sensors - LS (LED sensor), WS (magnetic sensor for water meter), MS (magnetic sensor) or pulse output.
• For each power meter it is necessary to have one Pulse converter
• AirTM-100.
• With the wireless solution and Sigfox / LoRa / NB-IoT communication, it can communicate instantly to your chosen location and be operated immediately.
• Data is sent to the server from which it can be subsequently displayed as a smartphone, application, or Cloud notification
• Anti-sabotage: If access to the device is unauthorized, a message is immediately sent to the server.
• Power supply: 5-12 V DC or 1x 3.6 V batteries SAFT with approx. 5 years (depending on the frequency of use).
• In the case of external power, the battery is automatically disconnected and serves as backup power.
• Protection degree IP65.

TECHNICAL PARAMETERS

• Battery power: 1x 3.6V LS 14500 Li-SOCl2 AA
• External power supply: 5 – 12 V DC (on terminal)
• Standby consumption: 0.2 mW
• Setting: With a message from the server using setting pins, SET button, programming cable
• Alarm Detection: message to the server
• Control: button SET Tamper
• Protocol: NB-IoT
• Transmitter frequency: LTE Cat NB1
• (Multiple frequency bands of B1 / B3 / B5 / B8 / B20 / B28)
• Range in open space: Approx. 30 km (Depending on network coverage)
• Working temperature: -30...+60°C (Pay attention to the operating temperature of batteries)
• Operating position: any
• Mounting: glue / screws
• Protection degree: IP65
• Dimension: 182 x 62 x 34 mm

DESCRIPTION

• The Pulse converter counting quantities of pulses from the energy meters (electricity, water, gas).
• The Pulse converter is designed for use on existing gauges even without impulse output „S0“ (gauge must support sensing).
• AirTM-100 converts gauge consumption using sensors - LS (LED sensor), WS (magnetic sensor for water meter), MS (magnetic sensor) or pulse output.
• For each power meter it is necessary to have one Pulse converter
  AirTM-100.
• With the wireless solution and Sigfox / LoRa / NB-IoT communication, it can communicate instantly to your chosen location and be operated immediately.
• Data is sent to the server from which it can be subsequently displayed as a smartphone, application, or Cloud notification
• Anti-sabotage: If access to the device is unauthorized, a message is immediately sent to the server.
• Power supply: 5-12 V DC or 1x 3.6 V batteries SAFT with approx. 5 years (depending on the frequency of use).
• In the case of external power, the battery is automatically disconnected and serves as backup power.
• Protection degree IP65.

TECHNICAL PARAMETERS

• Battery power: 1x 3.6V LS 14500 Li-SOCl2 AA
• External power supply:  5 – 12 V DC (on terminal)
• Standby consumption: 0.2 mW 
• Setting: With a message from the server using setting pins, SET button, programming cable
• Alarm Detection: message to the server 
• Control: button SET Tamper
• Protocol: NB-IoT
• Transmitter frequency: LTE Cat NB1
  (Multiple frequency bands of B1 / B3 / B5 / B8 / B20 / B28)
• Range in open space: Approx. 30 km (Depending on network coverage)
• Working temperature: -30…+60°C (Pay attention to the operating temperature of batteries)
• Operating position: any
• Mounting: glue / screws 
• Protection degree: IP65
• Dimension: 182 x 62 x 34 mm  
• Weight: Weight