NB-LoT Pulse transmitter - AirTM-100NB wireless sensor low power
Call for Price
*Price may change due to echange rate.
*Price may change due to echange rate.
SKU
8600054
SAP Item ID
8600054
The Pulse converter counting quantities of pulses from the energy meters (electricity, water, gas).
NB-LoT Pulse transmitter - AirTM-100NB wireless sensor low power
DESCRIPTION
- The Pulse converter is designed for use on existing gauges even without impulse output „S0" (gauge must support sensing).
- AirTM-100 converts gauge consumption using sensors - LS (LED sensor), WS (magnetic sensor for water meter), MS (magnetic sensor) or pulse output.
- For each power meter it is necessary to have one Pulse converter
- AirTM-100.
- With the wireless solution and Sigfox / LoRa / NB-IoT communication, it can communicate instantly to your chosen location and be operated immediately.
- Data is sent to the server from which it can be subsequently displayed as a smartphone, application, or Cloud notification
- Anti-sabotage: If access to the device is unauthorized, a message is immediately sent to the server.
- Power supply: 5-12 V DC or 1x 3.6 V batteries SAFT with approx. 5 years (depending on the frequency of use).
- In the case of external power, the battery is automatically disconnected and serves as backup power.
- Protection degree IP65.
TECHNICAL PARAMETERS
- Battery power: 1x 3.6V LS 14500 Li-SOCl2 AA
- External power supply: 5 – 12 V DC (on terminal)
- Standby consumption: 0.2 mW
- Setting: With a message from the server using setting pins, SET button, programming cable
- Alarm Detection: message to the server
- Control: button SET Tamper
- Protocol: NB-IoT
- Transmitter frequency: LTE Cat NB1
- (Multiple frequency bands of B1 / B3 / B5 / B8 / B20 / B28)
- Range in open space: Approx. 30 km (Depending on network coverage)
- Working temperature: -30...+60°C (Pay attention to the operating temperature of batteries)
- Operating position: any
- Mounting: glue / screws
- Protection degree: IP65
- Dimension: 182 x 62 x 34 mm
DESCRIPTION
- The Pulse converter counting quantities of pulses from the energy meters (electricity, water, gas).
- The Pulse converter is designed for use on existing gauges even without impulse output „S0“ (gauge must support sensing).
- AirTM-100 converts gauge consumption using sensors - LS (LED sensor), WS (magnetic sensor for water meter), MS (magnetic sensor) or pulse output.
- For each power meter it is necessary to have one Pulse converter
AirTM-100. - With the wireless solution and Sigfox / LoRa / NB-IoT communication, it can communicate instantly to your chosen location and be operated immediately.
- Data is sent to the server from which it can be subsequently displayed as a smartphone, application, or Cloud notification
- Anti-sabotage: If access to the device is unauthorized, a message is immediately sent to the server.
- Power supply: 5-12 V DC or 1x 3.6 V batteries SAFT with approx. 5 years (depending on the frequency of use).
- In the case of external power, the battery is automatically disconnected and serves as backup power.
- Protection degree IP65.
TECHNICAL PARAMETERS
- Battery power: 1x 3.6V LS 14500 Li-SOCl2 AA
- External power supply: 5 – 12 V DC (on terminal)
- Standby consumption: 0.2 mW
- Setting: With a message from the server using setting pins, SET button, programming cable
- Alarm Detection: message to the server
- Control: button SET Tamper
- Protocol: NB-IoT
- Transmitter frequency: LTE Cat NB1
(Multiple frequency bands of B1 / B3 / B5 / B8 / B20 / B28) - Range in open space: Approx. 30 km (Depending on network coverage)
- Working temperature: -30…+60°C (Pay attention to the operating temperature of batteries)
- Operating position: any
- Mounting: glue / screws
- Protection degree: IP65
- Dimension: 182 x 62 x 34 mm
- Weight: Weight
Write Your Own Review