Vigor 2760

Call for Price
*Price may change due to echange rate.
SKU
2342342334
The Vigor 2760 has VDSL2 and ADSL2 / 2 + modem and an Ethernet WAN port integrated into one product. The Vigor 2760 series can therefore be connected to VDSL2 or ADSL2 / 2 + or broadband Internet connections. With 4 Gigabit LAN ports with 1 port configurable as WAN port, an object oriented firewall, VPN, and two USB 3.5 ports for G/4G, printer and storage offer models from this series many possibilities. The n-models have an 802.11n wireless access point. The VoIP models in this series are equipped with two FXS ports for connecting analog telephones can be connected.
1. ADSL2/2+ & VDSL2
Compliant with ITU-T VDSL2 G.993.2
Compliant with G.997.1
Band Plan: 998, 997
Annex A, Annex B
VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
VDSL2 PTM
UPBO, DPBO Supported
US0 Supported
Compatible with POTS, PSTN
Capability Fall back to ADSL2/2+ Standards
Multi-VLAN
Multi-PVC
2. IP Version

IPv4
IPv6
3. Switch
Two Subnets
802.1q Bridge
IGMP Snooping
4. WAN Protocol
DHCP Client
Static IP
PPPoE
3.5G Connection and Backup
5. Content Security Management
IM/P2P applications Filter
URL Content Filter
GlobalView Web Content Filter
(Powered by commtouch)
6. Firewall
DMZ Host, Open Port, Port-redirection
Object-based Firewall
Local Filter with QoS
MAC Address Filter
SPI (Stateful Packet Inspection)
DoS/DDoS Prevention
Web Syslog
Logging via Syslog
E-mail Alert
Bind IP to MAC Address
Time Schedule Control
7. VPN
2 VPN Tunnels
VPN Passthough (PPTP/L2TP/IPSec)
IPsec Encryption: AES, 3DES, DES
IPsec Authentication: MD5, SHA-1
IPsec DPD (Dead Peer Detection)
IPsec Main /Aggressive Mode
IKE Authentication: Pre-shared Key, X.509
PPTP MPPE
L2TP over IPsec
DHCP over IPsec*
8. Network Feature
DHCP Server/Client
DHCP Option*
UPnP 30 sessions
IGMP V2/V3
DNS Cache/Proxy
Dynamic DNS
NTP Client
Static Routing
RADIUS Client
RIP v1/v2
9. Network Management
Web-based User Interface (HTTP/HTTPS)
Quick Start Wizard
CLI (Command Line Interface, Telnet/SSH)
Configuration Backup/Restore
Built-in Diagnostic Function
Firmware Upgrade via WUI
Multi-level User Management
Administration Access Control
Logging via Syslog
Management Session Time out
SNMP Management MIB-II
Data Flow Monitor
TR-069
10. Wireless AP
Support 2T2R 2.4GHz, Single Band
IEEE802.11n Compliant
64/128-bit WEP, WPA/WPA2
Hidden SSID
MAC Address Access Control
WPS
Wireless Client List
Access Point Discovery
WDS (Wireless Distribution System)
Multiple SSID
WMM
11. USB Port
Printer Sharing
FTP function for file sharing
3G as Back Up
NAS Facility (Add a USB Memory Sticks or USB Hard Drives for Shared LAN Multimedia Storage/Access)
The Above Mentioned NAS Also Support a Built-in DLNA Server*
12. Bandwidth Management
Layer 3 QoS by IP, Port, Protocol
Bandwidth/Session Limitation
13. VoIP
Protocol: SIP, RTP/RTCP
6 SIP Registrars
G.168 Line Echo-cancellation
VoIP Status
PSTN Loop Through
Codec Features :
G.711 A/μ law
G.723.1
G.726
G.729 A/B
VAD/CNG
DTMF Relay :
In Band
Out Band (RFC-2833)
SIP Info
FAX/Modem Support :
G.711 Pass-through
T.38 for fax Sending/Receiving
Supplemental Services :
Call Hold/Retrieve
Call Waiting
CLIR (Calling Line Identification Restriction)
Call Forwarding (Always, Busy and No Answer)
Call Barring (Incoming / Outgoing)
Hotline
DND (Do Not Disturb)
Call Transfer
MWI (Message Waiting Indicator) (RFC-3842)*
Write Your Own Review
You're reviewing: Vigor 2760