K-1900-7 IP EWP waterproof phone for VoIP SIP PoE

€655.00
*Price may change due to echange rate.
SKU
K-1900-7 IP EWP waterproof phone for VoIP SIP PoE
The K-1900-7-EWP IP phone can be programmed to automatically dial a phone number after lifting the handset. If the call is not answered can call the K-1900-7 IP EWP to 4 reserve numbers. The K-1900-7 IP EWP is designed for fast and reliable communications for VoIP SIP systems with PoE. The phone can be configured from a PC on the same LAN or remotely with a static IP address.

The K-1900-7-EWP IP phone can be programmed to automatically dial a phone number after lifting the handset. If the call is not answered can call the K-1900-7 IP EWP to 4 reserve numbers. The K-1900-7 IP EWP is designed for fast and reliable communications for VoIP SIP systems with PoE. The phone can be configured from a PC on the same LAN or remotely with a static IP address.

If the call is answered from the K-1900-7 IP EWP receiver can operate the relay for controlling door locks or gates. This relay is also configurable to activate during a call, and can be used for CCTV control.

The K-1900-7 IP EWP has the same features as the K-1900-7 IP but with Enhanced Weather Protection (EWP). EWP by this phone can also be used outdoors. EWP includes as an extra; foam seals, closed terminals, potted electronics, protecting the speaking and listening component, and more. This phone is thus withstand a humidity of 100%.

applications

  • Door and gate communication
  • telephone kiosk
  • customer service phone
  • Self Service Points
  • Security and emergency phone
  • detention Phone

Opportunities

  • Vandal Resistant: 316 stainless steel high quality stainless steel front, heavy handset hook and hook switch, stainless steel armor cloak and security screws (Torx).
  • Weatherproof: Marine grade stainless steel 316 stainless steel front and Torx screws.
  • Telephone with (compatible HAC) volume via closed pushbutton horn.
  • 2Amp relay make and break for door lock control or CCTV signaling.
  • SIP compliant (see list of tested IP PBX systems)
  • Power supply: Power over Ethernet (PoE) (class 2, <6.5W)
  • Automatic Noise Canceling (ANC) function for good communication in loud surroundings.
  • Firmware can be downloaded from the network
  • The K-1900-7 IP EWP is standard equipped with 137cm (54 ") armed handset cord.
  • Automatically dials up to 4 reserve numbers on busy or no answer.
  • Version with Enhanced Weather Protection (EWP) is waterproof (IP66 protection)
  • To configure remotely.
  • Wide temperature range -40 ° C to 60 ° C
  • Automatically assume for monitors.

specifications

  • Power supply: PoE (Class 2, <6.5W)
  • Size Front: 127mm x 254mm x 3mm
  • Weight: 1.7 kg
  • Temperature range: -40 ° C to 60 ° C
  • Humidity: 100% RH
  • Handset cable length: ± 137cm (54 ")
  • Installation: mounting (including junction box.)
  • Audio Codec: G711u, G711A, G722
  • Network: IEEE 802.3 af PoE, RFC3261 SIP 2.0, 100BASE-TX with auto crossover
  • Connection (1) RJ45 10/100 Base-T
Write Your Own Review
You're reviewing:K-1900-7 IP EWP waterproof phone for VoIP SIP PoE